Maintenance method of tensile testing machine:

1. The fixtures equipped with the tensile testing machine should be coated with anti-rust oil for storage;

2. Because the jaws are often used, it is easy to wear, and too much oxide scale can easily cause small piston damage and oil leakage, so the jaws should be cleaned frequently and kept clean (it is best to clean after each test);

3. Regularly check the screws at the jaws, if any looseness is found, tighten it in time;

4. The sliding surface of the inlaid steel plate and the lining plate and the dovetail groove surface of the lining plate should be kept clean, and a thin layer of MoS2 (molybdenum disulfide) grease should be regularly applied;

5. Regularly check the transmission of the sprocket. If any looseness is found, retension the tensioner.

Four Way Shuttle System

Shuttle Racking System,Radio Shuttle System,Radio Shuttle Racking System,Four Way Shuttle System

Changchun Rochiev Intelligent Equipment Manufacturing Co., Ltd. ,